Trend

Overview Trend C165X1/2TC Profiler 19.1mm diameter X19.1mm cut Template/Profilers Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage.Specification-D=3/4 inchD=19.1 mmC=3/4 inchC=19.1 mmShank Diameter=1/2 inch

Overview Trend C040X1/2TC Self guided rebater 35mm diameter x 12.7mm cut Bearing Guided These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut...

Overview Trend C119X1/4TC Self guided bevel trim angle=65 deg. Self Guided Bevel Trimmers This is bearing guided and gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.Specification-C=1/4 inchC=6.3 mmB=12.7 mmA=65 deg.Shank Diameter=1/4 inch

Overview Trend C055X1/4TC Radius 7.9mm radius x 15.9mm diameter Cove Style Radius Cutters These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the...

Overview Trend C074X1/4TC Rounding over 3.2mm radius x 9.5mm cut Bearing Guided Round Over & Ovolo Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter...

Overview Trend C056AX1/2TC Radius 9.5mm radius x 32mm cut x 80mm Cove Style Radius Cutters FEATURES These cove style cutters with two flutes, give radius-ed grooves for decorative panel finishes and board edges For deep channels, take a series of passes. Ref. C056A is...

Overview Trend C041AX1/4TC Dovetail cutter angle=104 deg. 12.7mm diameter Dovetail Cutters These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table...

Overview Trend C214X1/2TC Bearing guided 3 deg. undercut 50mm cut Bearing Guided 3 Degree Leading Edge 3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb.Specification-D=24.2 mmC=50 mmA=93 deg.Shank Diameter=1/2...